Archive for the ‘Lighting’ Category

Acid Etching, Tin Lighting, Loft Railing and Floor, and, Of Course, More Snow–Feb, 2010

February 8, 2010

We are pulling together loose ends and finishing projects at Bunny Vista. Erin has been a frequent worker and has painted, cleaned, and helped push us forward as we try to make practical decisions to get the house ready to pass the occupancy inspection. Nick worked to clean and prep the basement floor for acid etching. The radiant floor heating is operational and is finally using the geothermal system instead of the on-demand hot water heater. The electrical work is also nearing completion. Here are a few photos of recent work.

John Boody gave us some amazing spalted sycamore for the loft floor, which also forms the ceiling for the dining area. Kelley is putting finish on the prepared floor boards.

John Boody kindly gave Kelley some spalted sycamore for the loft floor, which adds another unusual element to the timber frame room.  Spalted wood has been discolored by fungi or rot. The discoloration can form amazing patterns. Kelley says that the spalting of this sycamore looks like an oil painting. It is particularly wonderful looking up at the loft floor from the dining area, where it forms the ceiling.

The basement floor during acid etching

Kelley, Nick, and Erin painstakingly acid etched the basement floor, using muriatic acid to change the color of the concrete floor to this leathery brown color. Kelley decided to acid etch the floor for several reasons. First, it is a permanent finish with little upkeep. The lime in the concrete reacts with the acid when it is applied, changing the color of the concrete, so it never chips or wears, although it will need to be waxed once or twice a year. More important to Kelley, finishing the concrete rather than applying another layer of flooring on top of the concrete allows the radiant floor heating to work most efficiently.

Acid etching the floor required many hours of research and consultation, followed by countless hours of hard work. Nick and Erin spent several days scrubbing the floor to remove every trace of paint, dry wall mud, and dirt. After Kelley, Erin, and Nick tested a couple of different acids and a couple of different application methods, they felt at least a little confident that they had achieved the best color they could. They began applying the acid to the floor. Kelley sprayed two applications of acid onto the surface and Nick brushed it with a long-handled brush. Erin removed all of the residue, another process that sounded easier than it actually was. Kelley and Erin sprayed on three coats of sealer and spread the sealer with paint rollers and a lambswool mop. Finally Kelley applied two coats of wax. There are apparently a number of YouTube videos showing the ease of this process. None of them are to be trusted. It was a labor-intensive chore, but the results are beautiful. Thanks, Nick and Erin. You are invited to watch TV in the TV room and spend the night in the guest room. But you may not store any items in the storage room. Sorry.

Yes, the floor is beautiful and shiny with the lovely color and leathery look the Internet sites promised.

We ordered some tin lighting fixtures from Michael Walsh, who is the person behind Early American Tin Lighting. We have ceiling fixtures for the dining area and the hallway between the log rooms. We also have three pierced tin pendants for the kitchen, some sconces for the log rooms, and three exterior lights. Mike’s work is beautiful, and I was really happy to find a local craftsman. Mike lives and has his workshop and gallery in a wonderful log home west of Dayton.

This fixture hangs in the hallway between the two log rooms.

The ceiling fixture at night.

The master bedroom has two sconces and the office has one.

Master bedroom sconce

The second master bedroom sconce

Kelley is working now to complete the loft railing. He is using Atlantic white cedar boards left from building the deck.

Kelley set the boards for the railing in place to check for size and placement. The center board will be wider, and our plan is for Kelley to saw a decorative cutout in it. Kelley has taken the boards out, and today he worked on putting finish on them.

And, of course, we have had more snow. About a foot of snow fell this weekend. Kelley and Erin spent much of the afternoon today getting the truck unstuck and shoveling the driveway. I am trying to remember that the snow is beautiful. Here are some snowy views from the front porch.

Standing on the front porch and looking toward the southwest.

Icicles on the log section

Advertisements

Rumford Fireplaces

August 11, 2009

Kelley has been on his toes for the past few weeks, keeping up with all the activity at Bunny Vista. We’ve had crews of electricians, plumbers, and roofers, in addition to Lewis, Braxton, and Aaron, and sometimes the area between the house and the trailer looks like a big traffic jam. The plumbers have finished the roughing in, and the plumbing passed inspection with flying colors. The electricians have wired the log rooms, the hallways, and the kitchen; with the log rooms wired, Braxton has been able to finish chinking the office, hallways, and guest bathroom. We continue to consult about wiring for the timber frame section, while we wait for the electrician to return.

The roofers have arrived and have begun laying the cedar shingles. The roof is gorgeous. I have another post partially written about the cedar Kelley found for the roof, and I’ll post it as soon as Kelley takes a few more photographs.

In other construction advances, Eric Thompson arrived with drawings for the heating and cooling system and lots of ideas for placement for the cooling ductwork and vents. The insulation guy has given us an estimate on the non-log portions of the house. Kelley has painted the walls of the mechanical room, and we are expecting the crew from the electric company to be here soon to run the line to the new house. The meter is in place, and the electrical panels passed inspection. Kelley says that John Boody has the kiln just about ready to dry the poplar bark and the flooring wood. Kelley has ordered the windows and doors from a company in Harrisonburg, which required much price comparing, compromising, and hair-pulling. I can hardly wait for the windows to arrive. The rest of the skylights are on order and should be here tomorrow or the next day.

Yesterday, Kelley and I went to look at tin lighting fixtures at Early American Tin Lighting, which is a small shop in the basement of an amazing log house several miles west of Ottobine. It was my first visit to Ottobine, which is about six miles west of Dayton. There is a large Mennonite community in that area. We spent several hours talking with Mike Walsh, the owner of the shop. We picked out three tin sconces for the log rooms, a chandelier for the hallway between the log rooms, two triangular exterior lanterns, a chandelier for the dining area, and three pendants for the kitchen. My heart is still beating pretty fast, and I am contemplating the purchase of a lantern for the lamp post, another sconce for the entry, and two more triangular lanterns for the big front porch. Kelley is trying, without much success, to calm me down. I had not intended to choose so many fixtures, but they were very beautiful and just seemed to fit the character of Bunny Vista so well.

Lewis has been hard at work on the two Bunny Vista fireplaces, which are back-to-back with one fireplace in the the timber frame room and one on the screened porch. He is building them of the same sandstone he used for the foundation of the screened porch, and I have been slipping up to the house every evening to check on the progress. The fireplaces are unbelievably beautiful, even in their unfinished state.

When Erin saw them a couple of weeks ago, she noticed immediately that they are very shallow. And Kelley was very happy to explain that the fireplaces are called Rumford fireplaces and are of a special design developed in the 18th century by Count Rumford. They were common from the late 18th century until the mid 19th century, when fireplaces were the main source of heat in many houses. They are tall and shallow and have narrow throats with curved and streamlined throats. Thomas Jefferson had Rumford fireplaces at Monticello, and I understand that Henry David Thoreau called them modern conveniences that everyone “takes for granted.”

Count Rumford was born Benjamin Thompson in Massachusetts in 1753. He was a British loyalist and left Massachusetts in 1776 to live in Europe. He was employed by the Bavarian government for many years, where he was given the title “Count of the Holy Roman Emperor” and was known for his work on the nature of heat. He also lived for some years in England where he published papers on his ideas for improving fireplaces. His fireplace design, tall and shallow with widely splayed sides, allowed more of the fire’s radiant heat to actually heat the room rather than escape up the chimney. To keep smoke from pouring into the room, a particular problem of this design, he redesigned and streamlined the throat of the fireplace so that the smoke shoots up the chimney.

Kelley ordered the Rumford components of the fireplace from Superior Clay Corporation, and Lewis set to work.

Kelley and Lewis bought these large stones from the same place near Goshen where they found the poplar bark. The largest stone is for the hearth.

Kelley and Lewis bought these large stones near Goshen from the same place they found the poplar bark. The largest stone will be the hearth.

Lewis moves one of the fireplace stones.

Lewis moves one of the fireplace stones.

 Lewis saws a fireplace stone.

Lewis saws the hearthstone.

Starting the fireplaces

Building the tall and shallow Rumford fireplaces

Building the tall and shallow Rumford fireplaces

This curved piece will form the front of one of the fireplace throats.

This curved piece forms one of the fireplace throats.

Rumford fireplaces are tall and narrow with widely splayed sides to help radiate heat into the room.

Rumford fireplaces are tall and narrow with widely splayed sides to help radiate heat into the room.

Back-to-back fireplaces.

Back-to-back fireplaces.

Both fireplaces have gorgeous curved lintels. This is the inside fireplace.

Both fireplaces have gorgeous curved lintels. This is the inside fireplace.

Braxton shares his new knowledge with Lewis and Aaron. I can't wait to see what's next.

Braxton shares his new knowledge with Lewis and Aaron. I can't wait to see what's next.